Instructions for SCUF Infinity1 Controllers

To set up your SCUF Infinity1 Controller

First turn on your gaming console, then sync controller to console. Start a game of your choice.

Controller features can include

SCUF Infinity1 controller outline

SCUF Infinity1 Paddle Control System
SCUF Grip
SCUF Pro Grip Handles
SCUF FPS Adjustable Triggers
SCUF Hair Trigger Mechanism
SCUF Precision Thumbsticks
SCUF Infinity Rings
SCUF Infinity Lock
SCUF Control Disc
Pro Edition Switches
EMR (Electro Magnetic Remapping)
Weight Reduction *
Competition Approved **
Patented Features

* Weight reduction achieved by removing controller rumble pack.

** SCUF controllers are legally approved for use at most major competitions to include MLG, ESL, UMG, Gfinity, EGL and ESWC.

Patent information: https://scufgaming.com/patents

SCUF Precision Thumbsticks, Infinity1 Ring and Lock

Step 1 Place the SCUF Infinity Lock on the Infinity Ring. The grooves on the lock will need to line up with the grooves on the ring in order to remove the rings.

Step 2 When the lock and ring are lined up, turn the lock counter clockwise until movement stops. Pull up on the thumbstick to remove the ring and the thumbstick.

Step 3 Once the ring and thumbstick have been removed from the controller, replace with a new thumbstick of your choice.

Step 4 When placing a new thumbstick onto your SCUF Infinity controller, be sure to line up the thumbstick on the thumbstick shaft to ensure correct placement. The thumbstick will lock into place on your controller. Once locked, place the Infinity Ring over the thumbstick and onto the controller. Use your SCUF Infinity Lock to secure the ring in place by turning the lock clockwise, until movement stops.

SCUF Infinity1 Paddle Removal and Replacement

SCUF Infinity1 Paddle Removal and Replacement

Step 1 It’s recommended that you remove the paddle hatch from the controller by holding the controller with your non-dominant hand and placing your dominant hand thumb in the center of the paddle hatch. Apply light pressure and slide the hatch off, thus removing the hatch.

Step 2 Holding the paddle hatch in your non-dominant hand, place the index finger of your dominant hand under the back of the paddle with your thumb on the front of the paddle. Apply light pressure by pinching the paddle and then lift and pull away from the paddle hatch. The paddle should slide out with light pressure.

Step 3 To add paddles to your controller, hold the paddle hatch in your non-dominant hand, place the index finger of your dominant hand under the back of the paddle with your thumb on the front of the paddle. Place the tooth of the paddle into the paddle hatch cavity. With light pressure, push the paddle into the cavity to lock the paddle into place. You will hear a click when the paddle is secured into the paddle hatch.

Note: The paddle includes an embossed L, C or R on the back of the paddle to ensure correct paddle placement. Match the letter(s) embossed on the paddle to the corresponding position on the hatch.

SCUF FPS Adjustable Trigger Grips: Hair Trigger + Trigger Stop Mechanism

SCUF FPS Adjustable Trigger Grips: Hair Trigger + Trigger Stop Mechanism

Adjusting Your Triggers
To finely tune your SCUF FPS Adjustable Trigger Grips, place the 0.9mm Hex SCUF Key into the hole in the grip and turn.
Turn the key clockwise to decrease the movement of the trigger and turn the key counter-clockwise to increase the movement of the trigger.

Removing Trigger Grips
To switch out your SCUF FPS Adjustable Trigger Grips with the Xbox plastic handles or your SCUF Pro Grip handles, use your grip removal tool to apply pressure to the top of the grip and remove the grip. The striker plates will remain on the controller and will not affect your gameplay with the standard Xbox or SCUF Pro Grip handles.

EMR - Electro Magnetic Remapping

SCUF EMR - Electro Magnetic Remapping

Step 1 Turn on the game console and your SCUF controller
Step 2 Place the EMR Mag Key on the back of the controller (as indicated) so the magnet symbol latches onto the controller
Step 3 Press and hold the paddle that you wish to map a controller function to
Step 4 Press and hold the function (A, B, X, Y, Left Dpad, Right Dpad, Left Thumbstick down, Right Thumbstick down) that you would like to map to a paddle.


Step 5 Release the function
Step 6 Release the paddle
Step 7 Remove the EMR Mag Key and place it at least 5cm away from the back of the controller to prevent the SCUF controller from accidentally entering remapping mode.

Note: This is an optional feature available if selected at time of purchase. Visit www.scufgaming.com/EMR for a list of functions available for remap