Instructions for SCUF IMPACT
To set up your SCUF IMPACT
First turn on your gaming console, then sync controller to console. Start a game of your choice.
Controller features can include
Interchangeable Thumbstick Control Area
IMPACT Ring and Lock System
Quick Shift Trigger Stop
Variable Length Trigger Extenders
Military Grade Grips in Multi-Colors
4 Removable IMPACT Paddles
EMR (Electro-Magnetic Remapping)
Removable Control Disc
Custom Button and Trim Kits
SCUF 0.9mm Hex Key
Cable Retention System
Weight Reduction *
Competition Approved **
* Weight reduction achieved by removing controller rumble pack.
** SCUF controllers are legally approved for use at most major competitions to include MLG, ESL, UMG, Gfinity, EGL and ESWC.
Patent information: https://scufgaming.com/patents
Resetting your SCUF Impact
Step 1 Turn off the controller.
Step 2 Remove the paddle closest to the L2 shoulder button.
Step 3 Locate the small reset button on the back of the controller near the L2 shoulder button.
Step 4 Use a small, unfolded paper-clip or something similar to push the button; the button is inside the tiny hole. Hold the button down for a few seconds and release.
Wired Connectivity through USB
Step 1 To change from a wireless connection to a wired one, turn off the controller and the PS4 console.
Step 2 Attach the charging cable to the USB socket in the middle of the front of the controller.
Step 3 Connect the opposite USB side of this cable to one of the USB ports on your PS4 console, and switch the console back on.
Step 4 Press the SCUF button on the controller when prompted on screen.
SCUF IMPACT Paddle Removal and Replacement
SCUF Impact Paddle Removal and Replacement
Step 1 Lift up slightly on the bottom of the paddle to be removed.
Step 2 Push the paddle upwards, and twist slightly out toward the closest handle to remove the paddle.
Step 3 To replace a paddle, twist the paddle into the paddle cavity from the top. Then slide to secure into place. You will hear a click when the paddle is secured in place.
Interchangeable Thumbstick Control Area
SCUF Ring and Lock System
Step 1 Place the SCUF Infinity Lock over the IMPACT Ring and Thumbstick on the controller. Line up the notches on the lock with the grooves on the ring. The notches on the bottom of the SCUF lock will insert into the grooves of the IMPACT Ring.
Step 2 When the lock and ring are lined up, turn the lock counter clockwise until movement stops. Pull straight up on the thumbstick to remove both the ring and the thumbstick at the same time.
Step 3 Once the ring and thumbstick have been removed from the controller, replace with a new thumbstick of your choice. When placing a new thumbstick into your controller, be sure to line up the thumbstick on the thumbstick shaft to ensure correct placement. The thumbstick will lock into place on the controller.
Step 4 Use your SCUF Lock to secure the ring in place by turning the lock clockwise until movement stops.
SCUF Trigger Extenders
Step 1 To replace the trigger cover, use your opening tool (included) to apply pressure under the attached trigger cover and push up.
Step 2 Once the cover has unclipped from the trigger, push down on the quick shift trigger stop and remove the cover.
Step 3 To replace the trigger cover, push the trigger down on the quick shift trigger stops and snap the top part of the cover on. Tilt the cover down to snap on to the trigger.
SCUF Impact Trigger System
SCUF Adjustable Hair Trigger
Step 1 Remove the short trigger cover or trigger extender to adjust the adjustable hair trigger mechanism.
Step 2 Insert the 0.9mm SCUF key into the adjustable screw on the top of the adjustable hair trigger mechanism (see diagram/photo)
Step 3 With trigger stops off turn the 0.9mm SCUF key two full clockwise turns to tighten and activate the adjustable hair trigger.
Note: It is recommended to adjust the hair triggers in game to adjust to preference. Tighten the adjustable hair trigger in game until the weapon fires, then loosen slightly to playing preference.
Step 4 To turn the adjustable hair trigger off, Insert the 0.9mm SCUF key into the adjustable screw on the top of the trigger mechanism and turn counterclockwise until the top of the screw is flush against the top of the trigger mechanism.
SCUF Quick Shift Trigger Stop
Step 1 Insert the 0.9mm SCUF Key into the Quick Shift Trigger Stop on the trigger mechanism
Step 2 Turn the 0.9mm SCUF Key 180° to either the left or right in order to turn on the Quick Shift Trigger Stop.
Step 3 To turn off the Quick Shift Trigger Stop, Insert the 0.9mm SCUF Key into the trigger mechanism and turn 180° to either the left or right.
EMR - Electro Magnetic Remapping
SCUF EMR - Electro Magnetic Remapping
Step 1 Turn on the game console and your SCUF controller
Step 2 Place the EMR Mag Key on the back of the controller (as indicated) so the magnet symbol latches onto the controller
Step 3 Press and hold the paddle that you wish to remap a function
Step 4 Press and hold the function (Χ, Ο, ∆, □, L DPAD, R DPAD, Left Thumbstick down, Right Thumbstick down) that you would like to map to a paddle
Step 5 Release the function
Step 6 Release the paddle
Step 7 Remove the EMR Mag Key and place it at least 5cm away from the back of the controller to prevent the SCUF controller from accidentally entering remapping mode.
Note: Visit www.scufgaming.com/EMR for a list of functions available for remap