SCUF Valor Pro - Frequently Asked Questions

Find answers to the most commonly asked questions about SCUF Valor Pro. Be sure to check out the Valor Pro quick start guide for more information.

To connect your Valor Pro to any Xbox Series X|S or Xbox One, just plug it in using any USB-C cable. Your controller will automatically connect. To turn it on, press and hold the Nexus button briefly. Once the button lights up, it's ready for wired play.

To connect to a PC, plug your Valor Pro wired controller into your PC with a USB-C cable. Windows should automatically recognize it and download the necessary drivers. That's it—your controller is connected, and you're good to go.

First, hold the profile button until the light starts blinking. Then, press the paddle you want to disable and the share button at the same time. The light will blink to confirm.

If you want to disable more than one paddle, repeat the previous step. Then, press the profile button to lock it in.

First, press the profile button until you see the color profile you want to adjust. Then, press and hold the profile button again until the right indicator light starts blinking.

Now, remap any paddle by pressing the paddle and the button you want it mapped to at the same time. The light will turn white and vibrate to confirm.

Lastly, to lock in your changes, press the profile button once more. When the right indicator stops blinking, your new profile is saved.

Locate the finger notch on the sides of the paddles. Using your finger, simply pull away from the notch until the inner paddle comes off.

Once the paddle is removed, take your blanking plate and line it up with the same spot where your paddle was. Press the blanking plate into place, and you're done. The inner paddles are now removed, and your controller is ready to go.

Start by using your finger to gently pull the faceplate off the top of the controller and carefully lift it over the thumbsticks.

Align the holes of your new faceplate with the thumbsticks. It will magnetically lock into place.

That's it—your controller is looking fresh again! And if you want to switch things up, SCUF has dozens of faceplate colors and designs to choose from. Head over to scufgaming.com to find your style.

First, start by gently pulling off the faceplate from the top of the controller.

Grab the thumbstick you want to remove and pull it up firmly. To put on your new thumbstick, align the hole on the bottom with the post and give it a slight push until it goes into place.

Replace the faceplate, and you're all set.

To use instant triggers, flip the trigger switch to the outside of the controller. Instant triggers are perfect for ultra-fast reactions, like firing a shot at the speed of a mouse click.

But maybe you're more of a racer. For those high-speed track days, flip the switch to the inside of the controller to unlock the full range of motion.

To use the audio control system, you must plug in a wired headset into the audio jack on your Valor Pro controller.

Adjust the game and chat volume using the dedicated audio knobs. With the right scroll wheel, you can mute your mic or change the chat and volume mix. With the left scroll wheel, you can mute the audio and adjust your headset volume.

Find your perfect balance between gameplay audio and squad chat.